A serger (overlock machine) for tailoring saves time only if it is well-suited to the fabrics and the pace of the workshop. Making the right choice requires comparing the models offered by SewShop, considering their prices in euros, and evaluating the total cost. Testing the machine on your specific materials before purchase is also important. Furthermore, a daily maintenance routine will keep the serger productive.
65+
Years of experience in the world of sewing
In a small workshop, the serger works alongside the lockstitch machine, speeding up the garment-making process. Its value depends on three factors: the cutting mechanism, the thread configuration, and the fabrics you work with on a daily basis.

The serger—also known as overlock machine—performs three tasks in a single pass: it trims the fabric, sews it, and finishes the edge, preventing the seam allowance from fraying. A blade trims the excess fabric, while the needles pass through the material. Loopers—hooks located beneath the needle plate—interlace the threads around the edge. The models described by SewShop utilize two blades: one fixed and one movable.
Conversely, a straight-stitch sewing machine creates straight seams but does not trim the fabric edge on its own. The two machines complement each other. In the SewShop overlock machine catalog, you will find models designed for both home use and intensive, professional-grade work.
Each thread configuration serves a specific purpose. A 2-thread setup produces lightweight finishes. A 3-thread setup is used for finishing edges and creating rolled hems, with the choice depending on the required durability. A 4-thread overlock stitch is the standard for joining and finishing knit fabrics and elastic materials. Certain 5-thread configurations create highly durable safety seams. The distinction lies between overlock machines and coverstitch machines: the latter creates elastic hems without trimming the fabric. While a combination machine may offer this capability, a 5-thread setup alone does not guarantee it.
For jersey and knit fabrics, elastic seams are required. For non-stretch fabrics, a serger (overlocker) is used to finish the edges. A rolled hem, on the other hand, is suitable for lightweight fabrics such as organza, chiffon, and silk.
In addition, differential feed allows you to adjust the movement ratio of the feed dogs—the teeth that push the fabric along. This helps prevent wavy seams in knit fabrics and puckering in lightweight materials. You can also use it to intentionally create gathers or ruffles. A free arm, when available, makes it easier to work on tubular pieces such as sleeves, cuffs, and pant legs.
Choosing a serger (overlock machine) starts with the type of work you do. A workshop that frequently switches between different materials has different requirements than one that performs the same stitch for hours on end. Once you have a clear idea of your specific needs, you can compare different models and test them using your own fabrics.

An advanced home serger (overlocker) is the better choice when a workshop frequently switches between different materials and finishes. In such cases, versatility matters more than raw speed. Consider features like ease of threading, access to the cutting blades, the machine's footprint, and the time required to change stitch settings.
Industrial overlock machines, by contrast, are designed for repetitive tasks and continuous use. They are available in 3-, 4-, and 5-thread configurations. Industrial-grade models typically feature direct-drive motors, integrated control panels, and a maximum practical operating speed of 7,000 stitches per minute. However, actual productivity depends on the entire workflow—preparation, sewing, and inspection. Therefore, evaluate the specific subclass and the complete workstation setup, rather than just the series name.
SewShop recommends the Juki MO-654DEN for semi-professional use. This professional Juki serger handles both lightweight and heavy materials. It makes threading the lower looper easy and reaches speeds of 1,500 stitches per minute.
The Singer S0605 serger features a DC motor with stitch-by-stitch control. It allows for the adjustment of stitch length, cutting width, and presser foot pressure. A safety interlock prevents the machine from operating if the front cover is open or the presser foot is raised.
The Pfaff Admire Air 5000 serger features air-assisted looper threading, activated by a lever. It uses manual tension adjustment and offers extra presser foot height to accommodate thick layers of fabric. It reaches a speed of 1,300 stitches per minute. The Pfaff Admire Air 5000 overlock machine weighs 7.8 kg and measures 35.1 × 28.4 × 29.9 cm.
The fact that a model is claimed to be suitable for thick fabrics does not prove that it can handle your specific stack of layers. For a meaningful comparison, you need at least three samples: a stretchy knit, a lightweight or slippery fabric, and the maximum thickness you actually work with.
Examine both sides of each sample. Then, check the elasticity and strength of the stitching, the evenness of the cut, and how the material behaves along curves and at intersections. During the test, also check the following points:
In practice, time the entire work cycle for a typical garment. This figure tells you more than the stated stitches-per-minute rate.

The list price is only one part of the total cost. For a laboratory, factors such as configuration, VAT, workstation setup, and support also come into play. The figures below represent orders of magnitude in euros and are intended to help guide your budgeting.

Compact sergers typically range from €300 to €350, VAT included. The price point increases with the addition of automated features and cover-stitch capabilities. Here are the main benchmarks:
The entry-level model is designed for those just starting out. Its low price suggests that it is not intended for intensive laboratory use.
| Type of machine | Indicative price | Note |
| Compact overlocker | €300–350 VAT included | Order of magnitude |
| 3/4-thread for beginners | €399 VAT included | Suggested price |
| Brother Airflow 3000 | €1,099 VAT included | Suggested price |
| Coverstitch | approximately €690 | List price |
| Combo overlock and coverstitch machine | approximately €1,399 | List price |
The figures of €690 and €1,399 are list prices, not market averages. SewShop typically offers discounts. Compare these against the features you actually use.
An industrial overlock machine, including a table, typically costs between €1,100 and €1,500. However, the specific configuration and the way VAT is handled can vary from one retailer to another. On the second-hand market, an overlock machine generally costs around €200–€250, depending on its condition.
An advertisement is no proof that a machine actually works. Before purchasing a used one, test the stitches, tension settings, blades, differential feed, foot pedal, and noise level. Once you have verified that it functions correctly, also check for the manual and needles—and, most importantly, ensure that there is a support service available.
A clear price quote breaks down the individual cost components. The main ones include the machine itself, VAT, transport, the work table, installation, and maintenance. Conversion times and potential periods of downtime are also factors. The key distinction often comes down to a single detail: an industrial price (excluding VAT) cannot be compared to a retail price (including VAT).
Legal consumer protections do not automatically apply to purchases made for business purposes. For example, a manufacturer might offer a 3-year warranty for non-commercial use, while the same warranty is reduced to 1 year for commercial use. SewShop tests products before shipment and provides consultation and support through its in-house technical workshop. Warranties range from 24 months to 5 years; please verify in writing the duration that applies to professional use.
A stopped overlock machine slows down the entire workshop. Many defects can stem from threading issues, needles, or blades. A routine inspection process helps you prevent these problems and diagnose them quickly.
The threads follow the order prescribed by the pattern. An incorrect order can prevent the chain stitch from forming. Before sewing, check the following:
Once the needle is installed, test the machine on a scrap of the same fabric. Check the tension, presser foot pressure, and the position of the edge in relation to the knife.
If the result is not satisfactory, change only one setting at a time. Then, keep the approved sample as a reference for future work.
Each fault has a specific troubleshooting sequence. Starting with the most likely cause avoids upsetting the voltage balance unnecessarily.
If the cut is uneven or frayed, check for debris and inspect the condition of the blades. Only then should you make adjustments to the tension. Timing—that is, the synchronization between the needles and the loopers—should be left to a qualified technician.
When finished, remove any accessible fabric scraps and lint. Lubrication, needle replacement, and servicing should be carried out according to the manufacturer’s instructions and the intensity of use. While sewing, guide the fabric without pulling it. Keep fingers, pins, and foreign objects away from the needle and blades, and always stop the machine before touching the cutting area.
In addition, the workstation requires space for head movement, good lighting, and access for cleaning. If employees work in the laboratory, the employer must select appropriate equipment, keep it safe, and provide relevant training.
Differential feed is expressed as a ratio, not in millimeters. The manual for one model suggests starting at 1.0 for stable fabrics. For stretchy fabrics, it recommends 1.0–2.0, and for thin fabrics, 0.7–1.0. These are not universal values; test them on a scrap piece of fabric, along with the presser foot pressure, stitch length, and tension settings.
Yes, provided the model allows you to disengage the knives. Check for this feature before making a purchase. When carrying out repairs, it is worth considering whether to trim the seam allowance, keeping in mind that the garment might be altered in the future.
SewShop presents the Juki MO-644DN as a balance between quality and price. It finishes both lightweight and heavyweight fabrics, including jersey. It uses standard 130/705H needles. This serger is designed for tailoring applications, making it well-suited for sportswear, technical fabrics, children's clothing, and undergarments.