No products in the cart.
Singer is one of the most well-known brands in the world of sewing machines. What should you do when a machine from this brand breaks down?
The easiest method of repairing sewing machines is, of course, to hire a specialized technician or go to an authorized store.
However, there are some minor faults that can be repaired independently, for example by using authorized spare parts from the manufacturer. This applies to the Singer brand, but also to all the most popular sewing machine brands.
To repair a sewing machine on your own, you need some tools, which are also useful for maintaining the machine itself.
So make sure you have the following on hand: small screwdrivers, lubricating oil specifically for sewing machines, some neutral soap spray, tweezers, old cloth cloths, very fine grit sandpaper, compressed air (even in a can).
The materials mentioned have a rather small cost and could be useful to avoid larger expenses, such as those of a repair.
If you don't have a technical manual for your sewing machine, get one. Well-known brands, such as Singer, make them available directly on their website. You will find it useful to To learn more about your sewing machine.
Use the knob to raise and lower the needle. Repeat the operation with the foot pedal. Thread a bobbin and try giving a few stitches; very often the problem comes from the handwheel itself.
Once this is done, remove the needle and all components that can be disassembled. Also remove the pedal for added safety.
Most problems on sewing machines, are solved by simply cleaning the parts and lubricating them properly.
Use tweezers to remove wires scattered in the machine. In case the wires cannot be removed, use a canister with compressed air, but do not overuse as it may ruin the smaller parts.
Lubricate all metal parts subjected to friction with each other (needle bar, looper, etc.) with a drop of oil .
Use an old piece of cloth soaked in lubricating oil and run it over all mechanisms.
While you are doing this check for broken or compromised parts (with special attention to belts).
Use fine-grit sandpaper to remove scale or any traces of rust.
If you cannot locate any damage, reassemble the sewing machine and try sewing again. If it doesn't work, contact your brand's technical support or a general sewing machine technician.
This procedure should be done periodically on all sewing machines, even if they are fully functional. It will enable you to make them last longer and avoid damage and breakage due to lack of maintenance.
In the case of repairs, always pay close attention to mechanical and electrical components and do not in any way try to disassemble sealed parts or work on the motor. For these operations, you should contact a trained technician.
Also remember to always perform maintenance operations with the electrical outlet unplugged.
antonio says:
rottura pezzo numero 5
Marco says:
Buonasera Antonio, non conoscendo il modello e qual’è il pezzo n° 5 non sappiamo come aiutarla.
lajoinie odile says:
ma machine à coudre fait des amas de fils du coté de la canette et je ne peux plus travailler
Marco says:
Bonjour Odile, ce défaut peut avoir de nombreuses causes ; il nous est donc difficile de vous apporter une solution sans examiner la machine. Nous vous recommandons de consulter la page suivante, en espérant qu’elle vous aidera à résoudre le problème: https://www.sewshop.eu/fr/assistance-technique-en-ligne/
Merci